Golding Fiber Tools - Triple Flyer Model

Triple Flyer Features

"Castle" type wheel with scotch tension
Handcarved wheel and sculptured figurehead
Choose Super High Speed with 6 ratios up to 24:1 or Ultra High Speed with 8 ratios up to 33:1
Hand built in walnut only
3 interchangeable, dual plane dynamically balanced flyers. Having 3 flyers with their respective ratio whorls enables the spinner to achieve high speed ratios without having to remove or add any parts to the wheel. Placement of an extra small driveband is all that is needed to increase ratios over 15:1.
Built-in Lazy Kate for 2 plying without having to remove the bobbins.
26 Custom sealed ball bearings (you'll never have to oil parts)
Wide, comfortable heel-toe double treadles
3 regular size bobbins (each one holds 4 oz of fiber), and 1 Jumbo Plying Bobbin (holds 8 oz of fiber). Bobbins are designed for normal or sensitive tensioning.
Optional accessory: 3 Ply Lazy Kate II (floor/table model)

	"MIDNIGHT SKY II" Handcarved Walnut with Accents Powder Coated Finish Ring Ratios to 33:1 $10,450.- SOLD-CONTACT TOM FOR AVAILABILITY


	"FLEUR DE LYS" Walnut with Ebony Accents Handrubbed Bronze Finish Ring Ratios to 24:1 $10,900 CONTACT TOM FOR AVAILABILITY
Below: Fleur de Lys Wheel and Figurehead	Below: Close-up of Figurehead

Below: Center Wheel Detail	Below: Footmen Detail
	"FENCE POST" (Walnut, Ebony, Handcarved with Ratios to 33:1
	Savannah Cats Footmen
	"SUN/MOON" (This is a Custom One-of-a-Kind Wheel) Walnut, Ebony, Gold Plated Insets and Bronze Alloy Ring Ratios to 33:1 Below: Views of Sun/Moon

	"BORDER COLLIE" (Flock of the Shepherdess Center Wheel) Walnut, Ebony, and Bronze Alloy Ring Ratios to 24:1 Below: Views of Border Collie

	"DRAGON #1" (Handcarved Walnut, Ebony, Carnelian Gemstones, Malachite Gemstones) Ratios to 33:1 Handrubbed Bronze Plated Ring Below: Views of Dragon #1



	"DRAGON #2" (GOLDEN DRAGON) (Handcarved Walnut, Ebony, Coral Gemstones) Ratios to 24:1 Bronze Alloy Ring Below: Views of Dragon #2



	"TAKING FLIGHT II" (Handcarved Walnut) Ratios to 33:1 Handrubbed Bronze Plated Ring Below: Views of Taking Flight II


	"FAMILY WHEEL" Walnut and Ebony Ratios to 33:1


"MOM"	"POP"
"ELDEST"	"MIDDLE"
"YOUNGEST"	"FAITHFUL COMPANION"
	"CELESTIAL FLIGHT" Walnut, Ebony, and Handrubbed Bronze Plated Ring Ratios to 33:1 $18,000
	Above: Figurehead of Celestial Flight
	Above: Wheel of Celestial Flight Left: Wheel detail of Celestial Flight
	Footmen detail of Celestial Flight
Above: Leg Detail of Celestial Flight
	"PAPYRUS DAWN" (handcarved) Walnut and Ebony Ratios to 24:1 This wheel was designed to incorporate motifs from wedding rings representing feminine and masculine elements. Below: Views of Papyrus Dawn Spinning Wheel



	"THE BUTTERFLY AND THE IRISES" Walnut, Two .175 Carat Amethyst Gemstones (total 3.50 carats) , Ebony, and Handrubbed Bronze Plated Ring Ratios to 33:1 $11,100
	Below: Footman Detail
	Below: Treadle Detail
Above: The Butterfly and the Irises Wheel
	"TAKING FLIGHT" Walnut and Ebony Ratios to 33:1
	Close-up of Figurehead

	"BEN'S SPIRIT" (Greyhound Rooing) BLACK WALNUT AND EBONY Ratios to 33:1 $11,500
	Front view of Ben's Spirit Wheel
	Whole view of Ben's Spirit
	Operator's view of Ben's Spirit
"Le Papillon Dans Fleur Splendide" (with Inlaid Peridot eyes) BLACK WALNUT Ratios to 33:1 $10,800



Below: Le Papillon dans Fleur Splendide with Handrubbed Bronze Finish Ring and Walnut Accents	Below: Le Papillon dans Fleur Splendide with added Bumblebees and Honeybees Below: Le Papillon dans Fleur Splendide with Amethyst Eyes
	Custom Figureheads available
	Flock of the Shepherdess Figurehead
	"Flock of the Shepherdess" Handcarved Black Walnut 24:1 Super High Speed Model: $9,200 33:1 Ultra High Speed Model: $9,490
	"Gigi's" Wheel Walnut 24:1 (Shown): $7,800 33:1 (not Shown): $8,090 The "sun burst" motif for this wheel was designed entirely by the customer. This is a lower priced wheel without carving, but has all the fine mechanics and engineering as any of our Triple Flyer spinning wheels.
	"Star" Wheel Walnut This wheel is a good example of collaboration between Tom and the customer. Working together, they came up with a "Star" motif for the wheel. It was built as a lower priced wheel without the carving. 24:1 $7,800
	"Pinscher" Wheel Walnut Ultra High Speed, 33:1 This wheel was also designed in collaboration with the customer. The grace and beauty of this dog breed comes to life with Tom's finely sculptured figure head. Handcarved paw prints on the treadles are a finishing touch. $11,000
	"Canine" Wheel Handcarved Walnut Ultra High Speed, 33:1 This wheel was designed and constructed for the business VIP FIBERS (Handspun yarn from your Very Important Pet). The owner's various dog breeds are represented and handcarved for the wheel and figurehead.
	"Dragonfly Wheel" Handcarved Walnut Ultra High Speed (33:1) $9,800 A spinner's love for dragonflies was the inspiration for the creation of this wheel. Carnelian gem stones were used for the dragonfly eyes.
	"Celtic Ring" Wheel